How to Measure Windows for Replacement in Your Salt Lake City Home?
Replacing the windows in your Salt Lake City home can be a daunting task, but it doesn’t have to be. One of the most important steps in the process is accurately measuring your windows for replacement. In this blog post, we will guide you through the process of measuring your windows, as well as provide tips on how to ensure that your measurements are accurate.
By following these instructions, you can ensure that your new windows will fit seamlessly into your home, providing you with improved energy efficiency and increased curb appeal. Whether you’re a seasoned DIYer or a first-time homeowner, this post will give you the knowledge you need to measure windows for replacement like a pro.
Why Measure Windows for Replacement?
Sometimes, old windows will cause more trouble than they’re worth, not living up to the needs of modern homeowners. You may want to replace your windows for various reasons, such as installing double-pane obscured glass that’s more energy-efficient and insulative.
You’ll need accurate measurements to send to the manufacturer to order new windows. Find below some tips on how to measure windows for replacement.
Here are 6 Easy Tips on How to Measure Windows for Replacement
Follow this short guide to get the height and width measurements required for replacement windows.
1. Prepare to use metric measurements for higher accuracy.
There’s nothing worse than taking measurements, sending them to the window manufacturer, and receiving them only to find they don’t fit. When cracking out your tape measure for your windows, make sure you take down the numbers in millimeters, not inches, so the replacements slot in perfectly.
2. Get the measurements of the outside opening.
Now, head outside to get the measurements of the window opening. The measurements from outside will provide more accurate numbers for height and width, starting from the edge of the brick to the other edge (don’t measure the old frame!).
3. Measure brick to brick in multiple places.
We’ll reiterate that accuracy is essential to ensure your new windows fit seamlessly during replacement. Measure in at least three different places, top, middle, and bottom, to get more accurate readings for height and width.
4. Minus 10 millimeters from the final height and width measurements.
Taking off 10 millimeters from your final measurements may seem strange, but there is a reason! The deducted height and width leave space for fitting, ensuring your replacements can slot in better, where any gaps will get filled with spacers.
5. Don’t measure the old window frame!
Again, we’ll mention not measuring the old frame as necessary because this is one of the most common errors when measuring windows. The existing one is no longer suited to your windows and may have eroded over time, which means measuring it would give inaccurate numbers.
6. Double-check your measurements.
Finally, running your measurements a few times is highly recommended to ensure you have the height and width right. No window manufacturers will take responsibility for any inaccuracies; you could be at a loss if you’ve paid for them.
Can Someone Else Measure Windows for Replacement?
Suppose you’re ready to replace your windows. In that case, JKR Windows is the area’s go-to specialist in the job, so they will measure windows for replacement, and install high-quality, energy-efficient windows. Get in touch with their professional team to discuss your replacement windows and get a free quote!